Previous month:
March 2019
Next month:
May 2019

April 2019

Non-Traditional Easter Wreath

Get ready for Easter, it’s almost here! 20190308_134931 BROTHER Sponsored Post copy

This spring project help get your home ready to celebrate and is a different twist on a standard wreath.

 

Supplies:

ScanNCutDX machine and accessories

12” x 12” White Vinyl

3” x 7” White Vinyl

5” x 12” Light Pink Vinyl

5” x 12” Dark Vinyl

Vinyl Transfer Paper

11” Circular Wood Sign

Self-Adhesive Rhinestones

FREE ScanNCut file: Click HERE to download

 

Instructions:

  1. Place the 12” x 12” white vinyl onto a ScanNCutDx mat and load it into the machine. On your ScanNCutDX, press “pattern.”

20190308_132941

Click on the second icon, scroll down to the icon with the donkey and fairy and press it.

20190308_132948

Scroll down and click on the floral wreath (AR-O036)

20190308_133019

Resize it to 10.5” wide

20190308_133041

Select “cut,” and turn the “half cut” setting on by clicking on the wrench and clicking “on.”

20190308_153242

Press “start.” After it’s finished cutting, unload the mat and remove the vinyl

 

 

  1. Download the free ScanNCut file and load the design onto your ScanNCutDX.

Image 3-8-19 at 11.24 AM

Delete the banner by selecting it, then clicking “edit,” then “delete.” Next, click “ok” three times.

20190308_133207

Place the 3” x 7” white vinyl onto a ScanNCutDx mat and load it into the machine.

Select “cut” then “start.” After it’s finished cutting, unload the mat and remove the vinyl

20190308_115150

  1. Press the home button and reload the downloaded pattern back onto your ScanNCutDX.

            Delete the words by selecting them, then clicking “edit,” then “delete,” and then “ok.”

20190308_133302

Next, click on “object edit” and increase the number of designs to 2.

20190308_133309

20190308_133346
20190308_133346

Place the 5” x 12” dark pink vinyl and the 5” x 12” light pink vinyl onto a ScanNCutDx mat and load it into the machine. Next, click “ok” three times.

20190308_154746

Click on “scan” and scan in the cutting mat.

20190308_155258

Drag the two banners into the correct placement. Then press “ok.”

20190308_155344

Select “cut” then “start.” After it’s finished cutting, unload the mat and remove the vinyl

 

  1. Weed out all of the vinyl sheets by removing the negative vinyl. For the banners, keep the dark pink for the outline and the light pink for the centers.

20190308_121815

  1. Cut a piece of transfer paper to 11” x 11” and remove the paper backing. Place the sticky transfer tape on top of the floral wreath and use a scrapper or spatula to burnish it onto the vinyl.

20190308_123904_001

  1. Slowly peel up the transfer tape to remove the vinyl from the backing.

20190308_123932

Place it so the wreath is centered on the wood sign.

20190308_124054

Burnish it again, and then slowly remove the transfer tape.

20190308_124208

20190308_124349

  1. Cut the used transfer tape down to 5” x 11” or use a new piece and remove the backing paper. Place the transfer tape down on top of the dark pink outline of the banner.

20190308_124637

Burnish it onto the vinyl and then slowly peel it up.

Without removing the banner outline, place it on top of the light pink banner pieces.

20190308_124846

Burnish it onto the vinyl and then slowly peel it up.

20190308_124940

Place the two layer banner where desired on the wood sign, burnish it and slowly peel off the transfer tape.

20190308_125200
20190308_125200

  1. Use the same transfer tape and same steps to transfer “Happy Easter” on top of the banner.

20190308_125539
20190308_125539

  1. Place rhinestones in the flower centers.

20190308_131708
20190308_161028

20190308_131708

Disclosure: Erin is a paid consultant and has received  products from Brother to evaluate. However, the opinions expressed are entirely her own and based on her use of the products.

This post contains affiliate links. If you buy from these links it won't cost you a penny more but Erin will make a little bit of money (not enough for a pony😉.)

ERIN Sig